Commercial Re-keying Butts County

Commercial (Business) Burglary

Voice Intercoms

Ninety per cent of burglary prevention is physical security (Locks). If your Butts County complex is locked up and unauthorized entry is made difficult, time consuming, noisy and visible, chances of a successful burglary are kept to a minimum. The burglar will pass up your Georgia business and look for an easier target.

Steps to Take to Prevent a Burglary in Butts County

Replace Lost Keys

Locks on all outside entrances and inside security doors should be double cylinder deadbolts with moveable collars. The deadbolt should have at least one inch throw containing a hardened steel insert and protected by a latch guard.

Padlocks should be of hardened steel, mounted on bolted hasps and always locked to prevent exchange. Serial numbers should be filed off to prevent new keys from being made.

Doors (all outside or security doors) should be of solid construction, metal lined and secured with heavy metal crossbars. Jams around doors must be solid. All exposed hinges should be pinned to prevent removal.

Windows should have secure locks. Burglar-resistant glass treatments are also recommended. An example would be the installation of polyester security film. However, this must be used in conjunction with the alarm’s glass break sensor. Heavy metal grates may be used on windows of high vulnerability (such as rear windows). Check with the Fire Marshall for safety requirements.

Lights must provide optimum visibility, both inside and out, with those outside having vandal-proof covers over the lights and power source. Entire perimeter must be well lit, especially the area around doors and other possible entry points.

Alarm System should be supplied by a licensed alarm company or Georgia locksmith with a central monitoring station. Check the alarm system on a daily basis, and advertise its presence to deter break-ins.

Cash Register should be kept in plain view from outside the building so it can be easily monitored and should be left open when empty and not in use.

CCTV Cameras

Safes should be fire proof, burglar resistant, anchored securely and in plain view. Leave it open when it is empty, and use it to lock up valuables when business is closed. Contact a Georgia locksmith to change the combination whenever someone with access to it leaves your employment.

Building Exterior should be checked including the roof, cellar and walls. Secure all openings.

Maintain Good Visibility by not allowing landscaping, boxes, trash bins, vehicles or equipment near building where they might provide concealment or access to the roof.

Perimeter Fences need to be adequate enough to keep intruders out, and at the same time allow good visibility of your business by neighbors and Georgia police (i.e. vertical iron bar fence or 1/8 inch mesh vinyl coated chain link).

Key Control should be done in a responsible manner. A master key system where one key opens all locks may be convenient, but it may not be the best for security. Code all keys, keep them locked up when not in use, and do not allow employees to leave them lying around or make duplicates. Change locks whenever you suspect key security has been jeopardized.


An Investigation of Different Types of Access Control Equipment and Their Uses

Keys By Code

Home invasion is described as the crime of entering a private and occupied property with the intention of theft or violence. It can also be applied to a situation where a homeowner invites someone into his or her house but the guest overstays a welcome, leading to an argument that may involve the authorities escorting the guest out. This is a different crime than theft, though it is similarly motivated and comparable in statistics. Home invasion is particularly dangerous because it may involve several criminals, one or more of which may be capable of great violence. After all, a burglar can plan his or her strategy around not being seen by others. However, home invaders are usually seen by the occupants, which can lead to deadly results.

There have been many cases of home invasion, and contrary to popular belief, not all of these crimes are committed because of soured relationships between known acquaintances and friends. There have been reports of criminals randomly choosing shoppers in malls and following them all the way home. This may be a very different set of circumstances than a typical robbery, because any loud siren noise would only provoke the invader, prompting him to order the homeowner to turn it off. This defeats the purpose of an alarm system. An older model alarm system may be equipped to handle theft but not address the possibility of a home invasion.

However, it's very possible that just the idea of such sophisticated security systems will discourage criminals from even attempting to invade a guarded home. They may be deterred from a warning sign or from other evidence that the premises is being monitored 24 hours a day and seven days a week. Instead, the criminal will turn his attention to a nearby house-one not equipped with an alarm system. Safeguard your home and family with a security system.


Home Invasions and Home Security

ADA Compliant Locks

Magnetic locks are among the most basic devices that are used by locksmiths when doing their job. If you aspire to become a technician in this field, then it is important to find out how it works, what it does, and the many benefits you can enjoy with its use.

Various Components of Magnetic Locks

Magnetic lock is also popularly referred to as mag lock, which is made up of an armature plate and an electromagnet that is widely used in the locksmith industry. The door opening is installed with a magnet inside of it to prevent any form of tampering with the device. Meanwhile, the armature plate is installed on the door's face to allow the mechanisms to work together efficiently.

As soon as the magnet is connected to an electrical source, there is a strong magnetic attraction that is built due to that connection. This helps to hold the magnet tight onto the plate that facilitates in a secure locking of the door. There are two ways in which the door lock is powered: 1) the use of a separate battery pack, or 2) the electrical system of the building. It is also possible to use DC power for the magnetic locks, which would require the additional use of a converter unit. There is also the ability to design these locks to become fail safe, which will ensure the door remains unlocked even if there is a power outage. Hence, occupants can exit the building safely even during such cases.

There are four basic methods of operating this type of lock. The first one is connected through a buzzer and operated manually to release the lock and open the door. The second one requires the use of a keypad system that required numerical code to activate the lock. The third one involves the use of card readers and is commonly used for commercial establishments. And finally, magnetic locks can be operated using fingerprint scanners that limit access into a building. Some more complex systems involve scanning various parts of the body such as the eye, facial features, among other things.


Butts County [tag]