Professional Residential Locksmiths Fulton County

Commercial (Business) Burglary

Door Closer\'s Installed And Replaced

Ninety per cent of burglary prevention is physical security (Locks). If your Fulton County complex is locked up and unauthorized entry is made difficult, time consuming, noisy and visible, chances of a successful burglary are kept to a minimum. The burglar will pass up your Georgia business and look for an easier target.

Steps to Take to Prevent a Burglary in Fulton County

Installation Of Exit Indicators

Locks on all outside entrances and inside security doors should be double cylinder deadbolts with moveable collars. The deadbolt should have at least one inch throw containing a hardened steel insert and protected by a latch guard.

Padlocks should be of hardened steel, mounted on bolted hasps and always locked to prevent exchange. Serial numbers should be filed off to prevent new keys from being made.

Doors (all outside or security doors) should be of solid construction, metal lined and secured with heavy metal crossbars. Jams around doors must be solid. All exposed hinges should be pinned to prevent removal.

Windows should have secure locks. Burglar-resistant glass treatments are also recommended. An example would be the installation of polyester security film. However, this must be used in conjunction with the alarm’s glass break sensor. Heavy metal grates may be used on windows of high vulnerability (such as rear windows). Check with the Fire Marshall for safety requirements.

Lights must provide optimum visibility, both inside and out, with those outside having vandal-proof covers over the lights and power source. Entire perimeter must be well lit, especially the area around doors and other possible entry points.

Alarm System should be supplied by a licensed alarm company or Georgia locksmith with a central monitoring station. Check the alarm system on a daily basis, and advertise its presence to deter break-ins.

Cash Register should be kept in plain view from outside the building so it can be easily monitored and should be left open when empty and not in use.

Keys Made For Desks

Safes should be fire proof, burglar resistant, anchored securely and in plain view. Leave it open when it is empty, and use it to lock up valuables when business is closed. Contact a Georgia locksmith to change the combination whenever someone with access to it leaves your employment.

Building Exterior should be checked including the roof, cellar and walls. Secure all openings.

Maintain Good Visibility by not allowing landscaping, boxes, trash bins, vehicles or equipment near building where they might provide concealment or access to the roof.

Perimeter Fences need to be adequate enough to keep intruders out, and at the same time allow good visibility of your business by neighbors and Georgia police (i.e. vertical iron bar fence or 1/8 inch mesh vinyl coated chain link).

Key Control should be done in a responsible manner. A master key system where one key opens all locks may be convenient, but it may not be the best for security. Code all keys, keep them locked up when not in use, and do not allow employees to leave them lying around or make duplicates. Change locks whenever you suspect key security has been jeopardized.


How Magnetic Locks Work and Their Benefits

Keys Made For Desks

Having access control equipment is often an important part of securing a building. Whether it is a video entry phone or digital keypad that unlocks a door, many businesses, offices and even private residential accommodation can benefit from this type of equipment. This article is going to look at the different types of access equipment available on the market to see how they work and where they could be used.

One of the most commonly used pieces of access control equipment is the video phone. These are excellent because you can see exactly who is standing on your front door step before opening the door. Elderly people living alone especially can benefit from such a device. With a video entry phone you can ask to see identification via the camera. These are also excellent for blocks of flats or houses with separate apartments so you can see who is at the door without having to come all the way down to open it. You can purchase video entry kits easily and have them installed in any type of home. They are available with colour picture as well as just black and white. You can also purchase straight forward audio entry phones and these work well, however you cannot see the person there nor view identification as there is only audio available. Audio entry kits are cheaper however and cost less to install and operate.

There are also a good range of automatic locking devices available on the market, exit buttons that need pushing in order to release a door and break-glass units too. Depending on your needs and your budget will determine what type of access control equipment you choose to buy. There are a good range of all these pieces of equipment and more available online.

Access control equipment is an important part of modern security and every type of workplace and home should consider it for added day to day security. You can buy video door entry kits, electric locks, card readers and even CCTV camera kits online where you will find the best selection and prices available.


How to Prevent a Burglary in Your Home and Improving Home Security

Timed Entrance Systems

Magnetic locks are among the most basic devices that are used by locksmiths when doing their job. If you aspire to become a technician in this field, then it is important to find out how it works, what it does, and the many benefits you can enjoy with its use.

Various Components of Magnetic Locks

Magnetic lock is also popularly referred to as mag lock, which is made up of an armature plate and an electromagnet that is widely used in the locksmith industry. The door opening is installed with a magnet inside of it to prevent any form of tampering with the device. Meanwhile, the armature plate is installed on the door's face to allow the mechanisms to work together efficiently.

As soon as the magnet is connected to an electrical source, there is a strong magnetic attraction that is built due to that connection. This helps to hold the magnet tight onto the plate that facilitates in a secure locking of the door. There are two ways in which the door lock is powered: 1) the use of a separate battery pack, or 2) the electrical system of the building. It is also possible to use DC power for the magnetic locks, which would require the additional use of a converter unit. There is also the ability to design these locks to become fail safe, which will ensure the door remains unlocked even if there is a power outage. Hence, occupants can exit the building safely even during such cases.

There are four basic methods of operating this type of lock. The first one is connected through a buzzer and operated manually to release the lock and open the door. The second one requires the use of a keypad system that required numerical code to activate the lock. The third one involves the use of card readers and is commonly used for commercial establishments. And finally, magnetic locks can be operated using fingerprint scanners that limit access into a building. Some more complex systems involve scanning various parts of the body such as the eye, facial features, among other things.


Fulton County [tag]